- Additional information
NEW! The PLC300Li6 is a feature packed portable Power-Link light system! Strobe patterns, arrow patterns, work lights, and marker lights… this light does it all. Customizing your PLC300Li6 is easy… Each button on the PLC-TX6 controller can be programmed to 25 different light patterns that will be sure to get you noticed! Additionally, you can add/remove the white LED’s from your strobe/arrows/etc. with the simple wave of a magnet.
On top of all the features packed into this small footprint, you can also daisy chain more PLC300Li6’s together to light an entire vehicle, roadway or building. Powered with our new lithium power system, you can be assured you will always have power for your lights! Order your PLC300Li6 today!
|Dimensions||36 × 10 × 10 in|
6 X 2 Work Lights 6 Diodes 13529
6 Diodes – 3 Watt Each LED
Voltage Range – 10V-30V
Current Draw: 12V/1.40A; 24V/0.7A
Color Temperature – 6000K
Waterproof – IP67
Die Cast Aluminum Housing
Includes Mounting Bracket
LED 4″ Clear Lens Amber 13933
31″ Towmate Wireless Light Bar
31″ wireless trim line truck bar provides stop, tail, and turn w/ side marker lights on each end. Range 1000 feet. Charges off of 12V DC. Lifetime warranty on electronics and LED's.
LED 4″ Clear Back Up Lamp 24 13930
LED 2.5″ Clear Lens Red Mark 13929
HELIOS 38″ Wireless Tow Light Bar with Lithium Technology HL38BUC
LED 2.5″ Clear Lens Amber Mark 13928
Fusion Light Bar 60″ FN6016
Towmate Wireless Wide Load Light Bar 48″
Wireless radio control and LED lights make this a simple choice. This 12 volt system uses a radio control directly from the truck's 7 way connector, It recharges from the truck's electrical system. It's light weight & Super durable. 4 large round LED displays and 3 small LED displays. Super bright LED lights can be seen even the worst weather conditions. This unit has a low power consumption and can last for up to 100,000 operating hours. Stop, turn, tail and marker lights are standard on this unit. Rubber tie-downs, remote control unit and instruction manual included. ***To Recharge your truck bar use the empty 7-pin Connector provided with your system. The Center pin is the 12V+ pin For RECHARGE and the Top silver pin is the chassis GROUND. Be sure to Find a full time power source even when the ignition is off on the vehicle. IT IS VERY IMPORTANT TO PLACE A 10 AMP FUSE ON THE 12V+WIRE…Our Competitor doesn't tell you about this requirement & has no idea how to wire it in, beacuse they never have wired anything before! Call us we can help you every step along the way! ***
LED 2″ Clear Lens Marker 10 PACK VALUE DEAL